When trying to remotely control large amperage equipment such as air conditioners or heavy-duty fans, you need a device like the HAC-30A. The HAC-30A makes it simple to control up to 30-amp @ 240 volt devices from a single timer or controller.

An internal heavy-duty relay inside the HAC-30 is turned On and Off by connecting the 15 ft "trigger cable" to any 120volt controller like the EVC or CHHC. When the controller turns ON, the trigger cable caries the voltage to the relay inside the HAC-30A, the relay activates, and the device connected to the HAC-30A is energized.

Think of the HAC as a remote high amperage switch. The HAC-30A is housed in a sealed, aluminum heat sink enclosure and can be mounted using the wall mount bracket included. The user must connect a 240 volt, up to 30 amp circuit to the HAC-30A.

* Some simple wiring is required.